About T vpn
Cisco Easy VPN Remote Last Updated: November 23, 2011 This document provides information on configuring and monitoring the Cisco Easy VPN Remote feature to create IPsec Virtual Private Network (VPN) tunnels between a supported router and an Easy VPN server (Cisco IOS router, VPN 3000 concentrator, or Cisco PIX Firewall) that supports this form of IPsec encryption and decryption. Finding Feature Information Prerequisites for Cisco Easy VPN Remote Restrictions for Cisco Easy VPN Remote Information About Cisco Easy VPN Remote How to Configure Cisco Easy VPN Remote Configuration Examples for Cisco Easy VPN Remote Additional References Feature Information for Easy VPN Remote Glossary Finding Feature Information Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the Feature Information Table at the end of this document. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required. Prerequisites for Cisco Easy VPN Remote Cisco Easy VPN Remote Feature A Cisco 800 series router running Cisco IOS Release 12.2(15)T, 12.3(2)T, 12.3(4)T, 12.3(7)T, or 12.3(7)XR2 configured as a Cisco Easy VPN remote. A Cisco 1700 series router running Cisco IOS Release 12.2(15)T, 12.3(2)T, 12.3(4)T, 12.3(7)T, or 12.3(7)XR, configured as a Cisco Easy VPN remote. A Cisco 1800 series fixed configuration router running Cisco IOS Release 12.3(8)YI. A Cisco uBR905 or Cisco uBR925 cable access router running Cisco IOS Release 12.2(15)T, configured as a Cisco Easy VPN remote. Another Cisco router or VPN concentrator that supports the Cisco Easy VPN Server feature and that is configured as a Cisco IOS Easy VPN server. See the "Prerequisites for Cisco Easy VPN Remote" section for a detailed list. A Dynamic Host Configuration Protocol (DHCP) server pool must be configured, for details see the DHCP Features Roadmap. An Easy VPN Server must
Key features of the T vpn that are enabled through these drivers include:
- T l charger un VPN
- VPN gratuit t l charger
- A VPN travel guide to T rkiye
- V2Nodes - Outline VPN T rkiye
- T i khoản Ivacy VPN
- Seed4Me VPN - T l charger
- Radmin VPN - T l charger
Be configured, for details see Easy VPN Server. Optionally, an Easy VPN Server on a Cisco PIX Firewall can be configured, for details see Easy VPN Server. Reactivate Primary Peer Feature An existing Easy VPN remote configuration can be enhanced to accommodate the Reactivate Primary Peer feature using the peer command (and default keyword) and the idle-time command. After the tunnel between the Easy VPN remote and a nondefault peer is working, the Reactivate Primary Peer features takes effect, that is, the Easy VPN remote periodically tries to check the connectivity with the primary peer. Any time the Easy VPN remote detects that the link is working, the Easy VPN remote tears down the existing connection and brings up the tunnel with the primary peer. Restrictions for Cisco Easy VPN Remote Required Easy VPN Servers The Cisco Easy VPN Remote feature requires that the destination peer be a Cisco IOS Easy VPN server or VPN concentrator that supports the Cisco Easy VPN Server feature. At the time of publication, servers or concentrators that support this feature include the following platforms when running the indicated software releases: Cisco 806, Cisco 826, Cisco 827, Cisco 828, Cisco 831, Cisco 836, and Cisco 837 routers--Cisco IOS Release 12.2(8)T or later release. Cisco 800 series routers are not supported in Cisco IOS Release 12.3(7)XR, but they are supported in Cisco IOS Release 12.3(7)XR2. Cisco 870 series--Cisco IOS Release 12.3(8)YI1. Cisco 1700 series--Cisco IOS Release 12.2(8)T or later release. Cisco 1800 series fixed configuration router--Cisco IOS Release 12.3(8)YI. Cisco 1812 router--Cisco IOS Release 12.3(8)YH. Cisco 2600 series--Cisco IOS Release 12.2(8)T or later release. Cisco 3620--Cisco IOS Release 12.2(8)T or later release. Cisco 3640--Cisco IOS Release 12.2(8)T or later release. Cisco 3660--Cisco IOS Release 12.2(8)T or later release. Cisco 7100 series VPN routers--Cisco IOS Release 12.2(8)T or later release. Cisco 7200 series routers--Cisco IOS Release 12.2(8)T or later release. Cisco 7500 series routers--Cisco IOS Release 12.2(8)T or later release. Cisco PIX 500 series--Software Release 6.2 or later release. Cisco VPN 3000 series--Software Release 3.11 or later release. Only ISAKMP Policy Group 2 Supported on Easy VPN
