About Antenna point .com
That plugs into your USB port of your computer to talk any number of boards with a standard range of 2-miles and up to 15 miles. You can choose the distance of the module installed at checkout.XBee-PRO 900 RF ModuleThis board is equipped with an 900HP Module. The XBee-PRO 900 RF module is ideally suited for less power-hungry, low-latency point-to-multipoint networking applications. Capable of point-to-point, peer-to-peer and point-to-multipoint networking, The XBee-900 modules have a higher selectable transmitting power of 250mW. This higher TX power allows for line-of-sight range up to 28 miles with the right antenna. It is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application.Line-Of-Site OperationAs with any wireless technologies, for optimal performance it needs to be line-of-sight. In other words the antennas of the board and modem must "see" each other to get the optimal range or even be able to communicate at all. Mounting slots on the modem make it easy to attach to a wall to allow for line-of-site operation.Standard Range AntennaThe XSC900SR Standard Range Antenna (distance of 2 miles) is included with the price of the controller. The included antenna is a 6" whip antenna with an RP-SMA threaded connection. The antenna will screw directly onto the wireless module. NCD has tested this device at 2 Miles with excellent results using smaller antennas than what would be required to achieve the 28-Mile range achieved by the manufacturer. All range tests are conducted in clear line-of-sight installations. It is not possible for us to accurately predict range prior to purchase. We cannot predict range inside buildings, using google map images, or predict interference that may be present at your location that would prohibit proper operation.900MHz Wireless ModemPlug the UXSCMSR_ZIGMO short range modem or UXSCMLR_ZIGMO long range modem into the USB Port of your computer. The modem will mount as a COM port on your PC. Open the COM port and start sending data to the modem. The modem will forward your data to all Wireless XSC compliant devices within range (it is also possible to speak to a specific
Key features of the Antenna point .com that are enabled through these drivers include:
- ANTENNA POINTING DEVICES - contactcorp.net
- How To Point Tv Antenna
- Antennas Direct Antennas Point - Transmitter Locator Tutorial - Find
- ANTENNAS DIRECT Antenna Point App User Guide - device.report
- Antenna Point on Windows PC Download Free - 1.9.7 - com
- Amazon.com: Point To Point Wifi Antenna
- Point-to-Point Antenna Market - MarketsandMarkets
0x01000000 25 0x02000000 26 0x04000000 27 0x08000000 N7 28 0x10000000 29 0x20000000 30 0x40000000 31 0x80000000 Component hardware failure OK Error Receiver Status Nibble Bit Mask Description Bit = 0 Bit = 1 N0 0 0x00000001 Error flag, see Table: Receiver Error No error Error 1 0x00000002 Temperature status Within specifications Warning 2 0x00000004 Voltage supply status OK Warning 3 0x00000008 Primary antenna power status See the ANTENNAPOWER command Powered Not powered N1 4 0x00000010 LNA Failure OK Failure 5 0x00000020 Primary antenna open circuit flag OK Open, antenna disconnected 6 0x00000040 Primary antenna short circuit flag OK Short circuit detected 7 0x00000080 CPU overload flag No overload Overload N2 8 0x00000100 COM port transmit buffer overrun. See AUX2 status bits (Table: Auxiliary 2 Status) for individual COM port status OK COM buffer overrun 9 0x00000200 Spoofing Detection Status Not Detected Detected 10 0x00000400 Reserved 11 0x00000800 Link overrun flag This flag indicates if any of the USB, ICOM, CCOM, NCOM or File ports are overrun. See AUX1, AUX2 and AUX3 status bits (Table: Auxiliary 1 Status, Table: Auxiliary 2 Status or Table: Auxiliary 3 Status) for the specific port for which the buffer is overrun. No overrun Overrun N3 12 0x00001000 Input overrun flag This flag is set if any of the receiver ports (COM, USB, ICOM or NCOM) experience an input overrun. No overrun Overrun 13 0x00002000 Aux transmit overrun flag No overrun Overrun 14 0x00004000 Antenna gain state See the AUX3 status bits (Table: Auxiliary 3 Status) for the antenna gain status. OK Out of range 15 0x00008000 Jammer Detected See the AUX1 status bits (Table: Auxiliary 1 Status) for individual RF status OK Jammer Detected N4 16 0x00010000 INS reset flag No INS reset INS reset 17 0x00020000 IMU communication failure No error No IMU communication 18 0x00040000 GPS almanac flag/UTC known Valid Invalid 19 0x00080000 Position solution flag Valid Invalid N5 20 0x00100000 Position fixed flag, see the FIX command Not fixed Fixed 21 0x00200000 Clock steering status Enabled Disabled 22 0x00400000 Clock model flag Valid Invalid 23 0x00800000 External oscillator locked flag Unlocked Locked
